-
Made of Closed-Cell Flexible Polyolefin
-
Available in a Wide Range of Inside Diameters and Wall Thicknesses
-
Self-Seal, Slit, Half-Slit, and Un-Slit Available
-
Cost Effective & Completely Recyclable
-
High Tear Resistance, Elongation, and Tensile Strength
-
Flexible Year-Round Pipe Protection from Freezing
-
and Condensation
-
Fiber-Free, Non-Porous & Resistant to Mold Growth
-
Very Low Water Vapor Permeability - No Additional
-
Vapor Barriers Required
-
Manufactured without CFCS, HCFCS, HFCS, PBDEs
-
and Formaldehyde
-
Indoor Air Quality: Low VOC, Fiber-Free, Non-Particulating, Formaldehyde-Free Insulation
For HVAC and Plumbing, Industrial,
Commercial and Residential Use
STANDARD PROTECTION
InnoFoam™
InnoFoam™ by PTI is a flexible, closed-cell foam pipe insulation that reduces condensation on piping applications and aids in energy conservation. InnoFoam’s closed-cell structure produces exceptional thermal properties that protect against moisture penetration in applications within a -200°F to +200°F temperature range.
​
With year-round protection and flexibility, InnoFoam is the perfect choice for a wide variety of environments and applications. InnoFoam comes standard in 6’ lengths, but is also available in continuous lengths and a range of wall thicknesses from 3/8″ to 1.5”.
​
InnoFoam is manufactured without CFCs, HCFCs, HFCs, PBDEs, and Formaldehyde and is fiber-free, non-porous, and resistant to mold, fungal, and bacterial growth and carries a 25/50 flame/smoke ASTM E-84 rating.
​
For more information, please consult the technical data sheet.
Temperature Ranges
Minimum | Maximum Use
-200° F (-129° C) to +200° F (93° C)
Density
1.0 to 1.5 PCF Nominal
Flame |Smoke
Less than 25/50 (ASTM E-84) Passes MVSS302
Thermal Stability
Less than 3% Linear shrinkage
Elongation
50%
Comprehensive Strength
@ 25% - 2.0-5.0 PSI
Tensile Strength
30 PSI