-
Made of a Proprietary Form of Closed Cell Polyolefin
-
Available in a Wide Range of Inside Diameters and Wall Thicknesses
-
Self-Seal, Full-Slit, and Half-Slit Available
-
Cost Effective
-
Completely Recyclable
-
High Tear Resistance and Elongation
-
More Flexible than Standard Polyethylene
-
Flexible Year-Round Pipe Protection from Freezing and Condensation
-
Resistant to Mold Growth
-
Non-Porous
-
Fiber-Free
-
Very Low Water Vapor Permeability – No Additional Vapor Barriers Required
-
Manufactured without CFCS, HCFCS, HFCS, PBDEs and Formaldehyde
-
Indoor Air Quality: Low VOC, Fiber-Free, Non-Particulating, Formaldehyde-Free
For HVAC and Plumbing, Industrial,
Commercial and Residential Use
DELUXE PROTECTION
InnoTough™
InnoTough™ offers a cost-effective replacement for more expensive insulation alternatives. Made with a proprietary engineered foam, InnoTough is tougher than standard PE pipe insulation with greater elongation and a broader temperature use range of -297°F to +220°F.
InnoTough is available in continuous or cut lengths and a range of inside diameters and wall thicknesses.
InnoTough is manufactured without CFCs, HCFCs, HFCs, PBDEs, and Formaldehyde and is fiber-free, non-porous and resistant to mold, fungal, and bacterial growth and carries a less than 25/50 flame/smoke ASTM E-84 rating.
Patent Pending
For more information, please consult the technical data sheet.
Temperature Ranges
Minimum | Maximum Use
-297° F (-183° C) to +220° F (104° C)
Density
1.2 to 2.0 PCF Nominal
Flame |Smoke
Less than 25/50 (ASTM E-84) Passes MVSS302
Thermal Stability
Less than 3% Linear shrinkage
Elongation
150%
Comprehensive Strength
@ 25% - 3.5-5 PSI
Tensile Strength
30 PSI
